Procedure for cannabinoids powders
1. *Calculate your "ml/spray"-ratio which depends on your spray bottle and how strong the cananbinoid is (lets say you need 50ml with 5mg/ml)
2. Mix 50ml Ethanol with 250mg until it dissolves completely
3. (optional) Ethanol will dry up your CBD Flowers and potentially mess up with the smell. Mix Terpines eg. Lemon-Terpines or Cannabis-Terpines to give it a distinct smell.
4. Fill it in a bottle
5. Flat out the cannabis flowers as flat as possible so each cannabis flower gets evenengly sprayed
6. Spray the content on the cbd flowers as even as possible
7. Let it dry up (depends on room humidity but can take up from 4h-2days)
8. (optional) Readd humidity (use google, there are different ways to achieve this)
Procedure for cannabinoids liquids such as THC by adding Terpines
Most cannabinoids are very sticky so Step 1 can be considered mandatory in all cases I know of.
1. (optioinal) If its not sprayable you can add terpines to make it more liquid
2. *Calculate your "ml/spray"-ratio which depends on your spray bottle and how strong the cananbinoid is (lets say you need 50ml with 5mg/ml)
3. Spray the content on the cbd flowers as even as possible
4. Let it dry up (depends on room humidity but can take up from 4h-2days)
5. (optional) Readd humidity (use google, there are different ways to achieve this
Procedure for cannabinoids liquids such as THC by Cooling, Crushing as Powder
This procedure is good if you don't have Terpines or can't add them.
1. Let your cannabinoids freeze for about 24h. You can put the cannabinoids on baking paper (don't thin it out but preferably as one solid chunk). This will make your cannabinoids hard as glass.
2. Take the cooled cannabinoids out and crush them to thin powder.
3. Sprinkle the powder as even as possible over the cbd flowers (try to only sprinkle as much mg/bud as it needs to make you high).
4. Use a scientific dryer to liquidify the frozen cannabinoids. This will make them stick.
Calculate "ml/spray"
Anyway a practical example: You only want to spray once per area*. Lets say your spray bottle sprays a circle area of 10cm^2 and lets say you can fit about 10g flat on that area, if your target is 1mg/g weed then the last step is to find out how much ml are you spraying per one spray. So you fill your bottle with eg. 10ml ethanol and you count how often had you to spray to empty it. Lets make it simple and lets say you needed 5 sprays to empty 10ml ethanol. In this case one spray has to contain about 10mg synthetic cannabinoids to fill our 10g cbd buds on 10cm^2 area. You will need a mixture of 5mg/ml cannabinoids/ethanol to spray it once.
Involved Risks
1. Overdose: Some cannabinoids are too strong to be "sprinkled as powders". Try to avoid full antagonist cannabinoids. Try to use only well known cannabinoids which have a lot of reviews online.
2. Getting high during procedure: You should protect your skin, eyes and wear a mask during the procedures. This is more important if you work with strong cannabinoids powders.
3. Contaminated area: Through air circulation the substance could land on surfaces. This is more important if you work with strong cannabinoids powders.
1. *Calculate your "ml/spray"-ratio which depends on your spray bottle and how strong the cananbinoid is (lets say you need 50ml with 5mg/ml)
2. Mix 50ml Ethanol with 250mg until it dissolves completely
3. (optional) Ethanol will dry up your CBD Flowers and potentially mess up with the smell. Mix Terpines eg. Lemon-Terpines or Cannabis-Terpines to give it a distinct smell.
4. Fill it in a bottle
5. Flat out the cannabis flowers as flat as possible so each cannabis flower gets evenengly sprayed
6. Spray the content on the cbd flowers as even as possible
7. Let it dry up (depends on room humidity but can take up from 4h-2days)
8. (optional) Readd humidity (use google, there are different ways to achieve this)
Procedure for cannabinoids liquids such as THC by adding Terpines
Most cannabinoids are very sticky so Step 1 can be considered mandatory in all cases I know of.
1. (optioinal) If its not sprayable you can add terpines to make it more liquid
2. *Calculate your "ml/spray"-ratio which depends on your spray bottle and how strong the cananbinoid is (lets say you need 50ml with 5mg/ml)
3. Spray the content on the cbd flowers as even as possible
4. Let it dry up (depends on room humidity but can take up from 4h-2days)
5. (optional) Readd humidity (use google, there are different ways to achieve this
Procedure for cannabinoids liquids such as THC by Cooling, Crushing as Powder
This procedure is good if you don't have Terpines or can't add them.
1. Let your cannabinoids freeze for about 24h. You can put the cannabinoids on baking paper (don't thin it out but preferably as one solid chunk). This will make your cannabinoids hard as glass.
2. Take the cooled cannabinoids out and crush them to thin powder.
3. Sprinkle the powder as even as possible over the cbd flowers (try to only sprinkle as much mg/bud as it needs to make you high).
4. Use a scientific dryer to liquidify the frozen cannabinoids. This will make them stick.
Calculate "ml/spray"
Anyway a practical example: You only want to spray once per area*. Lets say your spray bottle sprays a circle area of 10cm^2 and lets say you can fit about 10g flat on that area, if your target is 1mg/g weed then the last step is to find out how much ml are you spraying per one spray. So you fill your bottle with eg. 10ml ethanol and you count how often had you to spray to empty it. Lets make it simple and lets say you needed 5 sprays to empty 10ml ethanol. In this case one spray has to contain about 10mg synthetic cannabinoids to fill our 10g cbd buds on 10cm^2 area. You will need a mixture of 5mg/ml cannabinoids/ethanol to spray it once.
Involved Risks
1. Overdose: Some cannabinoids are too strong to be "sprinkled as powders". Try to avoid full antagonist cannabinoids. Try to use only well known cannabinoids which have a lot of reviews online.
2. Getting high during procedure: You should protect your skin, eyes and wear a mask during the procedures. This is more important if you work with strong cannabinoids powders.
3. Contaminated area: Through air circulation the substance could land on surfaces. This is more important if you work with strong cannabinoids powders.
Last edited:
